Saeco Coffee Makers RI9737 manual Installation Coffee Grinder, Circuit Priming

INSTALLATION - COFFEE GRINDER

11

Do not turn on the machine without water: make sure there is enough water in the tank.

•(Fig.24) - Remove the cover (2) and add the coffee beans.

Always add only coffee beans in the coffee bean hopper (1). Ground coffee, instant coffee or any other object may damage the

machine.

•Replace the cover (2) on the coffee bean hopper (1).

•Insert the plug into a suitable socket.

4.3 Circuit Priming

In the beginning, after dispensing steam or when the water tank is empty, the machine’s water circuit must be primed.

•The power button (5) is switched to -0-. Press but- ton (5) to turn on the machine. The light (23) on the control panel will turn on.

•(Fig.26) - Place a container beneath the steam wand (Pannarello)(12) to prime the circuit. Turn the knob (14) counter-clockwise and wait until water flows steadily out of the steam wand (Pannarello). Turn the knob (14) clockwise to stop water dispens- ing.

•The circuit is now primed.

4.4Using the machine for the first time or after a period of inactivity

This simple operation ensures optimum brewing and must be performed:

-At first start-up;

-When the machine remains inactive for a long time (more than 2 weeks).

Dispensed water must be emptied into an adequate drain. It is not suitable for food use. If the container fills up, stop dispensing water

during the cycle and empty it before resuming the operation.

1	(Fig.25) - Make sure that the water tank (7) is filled
2	with drinking water; otherwise, empty the tank and	English
	Place a container beneath the steam wand
	replace with fresh water.
	(Pannarello) (12) and turn the knob (14) counter-
	clockwise.
3	After 30 seconds (or when the container is full)
	stop dispensing water by turning the knob (14)
	clockwise.
4	Wait about 60 seconds. Repeat the operations from
	step 2 until emptying out the tank.
5	(Fig.25) - Once run out of water, fill the tank again
	(7) and carry out a new cycle from step (2) as previ-
	ously mentioned.
6	Once emptied the tank for the second time, fill it
	again with water; the machine is now ready for
	use.

Note: if required, prime the circuit.

•To brew coffee, dispense hot water or steam, and for a proper use of the machine, carefully follow the instructions provided.

5 COFFEE GRINDER

Caution! The grinder adjustment knob, inside the coffee bean hopper, must be turned only when the grinder is working. Do not pour ground and/

or instant coffee into the bean hopper.

Do not insert any material other than coffee beans into the hopper. The grinder contains moving parts that may be dangerous. Therefore, do not insert fingers and/or other objects. Turn the main power button to off and remove the plug from the socket before carrying out any type of operation inside the bean hopper. Do not pour coffee beans

when the grinder is working.

The quality and flavour of coffee depend on the grind, as well as on the blend used. The machine has a knob

(3)to adjust the coffee grind. Turn the knob when the grinder is working to adjust the grind. The digits on the knob indicate the grind.