Saeco Coffee Makers RI9737 manual General Information, Technical Data, To facilitate reading

GENERAL INFORMATION - TECHNICAL DATA

7

1 GENERAL INFORMATION

The coffee machine is suitable to make espresso cof- fee using coffee beans and is equipped with a device for the distribution of steam and hot water.

The machine has been designed for domestic use and is not suitable for a heavy or professional use.

Warning. No liability is assumed for any damage caused by:

•incorrect use not in accordance with the in- tended uses;

•repairs not carried out by Authorized Service Centres;

•tampering with the power cable;

•tampering with any part of the machine;

•the use of non-original spare parts and acces- sories.

In these cases, the warranty is not valid.

1.1 To facilitate reading

A warning triangle draws the attention to all the instructions that are important for the user’s safety.

Please carefully follow these instructions to avoid serious injury!

(Fig. 2) - Reference to figures, parts of the machine and controls is indicated by numbers or letters, like the reference to figure 2 in this section.

This symbol is used to highlight the information that is particularly important

for ensuring an optimal use of the machine.

1.2 How to use these operating
	English
instructions
Keep these operating instructions in a safe place
and make them available to anyone else who
would use the coffee machine.

For further information or in case of problems that are not included or not completely explained in these instructions, please contact the Authorized Service Centres.

2 TECHNICAL DATA

•Nominal voltage - Power rating - Power supply See label on the appliance

•Shell material

Thermoplastic

• Size (mm)

337 x 325 x 377

• Weight (kg)

8,5

• Cable length (mm)

1200

• Control panel

Front

• Water tank

1,7 (l) - Removable

•Coffee bean hopper capacity (g) 350 g of coffee beans

•Pump pressure (bar)

15

• Boiler

Stainless steel

• Safety devices

Boiler pressure safety valve;

safety thermostat.

Subject to engineering and manufacturing chang- es due to technological developments.