McCulloch 966564001, ZM3016 BF manual Personal Safety Equipment, Slope Operation

Page 11
Personal Safety Equipment

SAFETY

Personal Safety Equipment

WARNING!

When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment.

Make sure that you have first aid equipment close at hand when using the machine.

Never use the machine when barefoot.

Always wear protective shoes or boots, preferably with steel toe caps.

Always wear approved protective glasses or a full visor when assembling or driving.

Always wear gloves when handling the blades.

Never wear loose clothing that can get caught in moving parts.

Use ear protectors to avoid damage to hearing.

Slope Operation

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

Mow up and down slopes (10 degrees maximum), not across.

Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Choose a low ground speed so that you will not have to stop while on the slope.

Do not mow on wet grass. Tires may lose traction.

Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

Keep movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause machine to roll over.

Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine.

Do not use on steep slopes.

Do not try to stabilize the machine by putting a foot on the ground.

Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in.

8011-670a

Personal protective equipment

6003-004

Mow up and down, not side to side

WARNING!

Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across any slopes.

11

Image 11
Contents ZM3016 BF Operator ManualIn order to implement improvements, specifications and designs can be altered without prior notification Contents Page Driving and Transport on Public Roads INTRODUCTIONCongratulations GeneralManufacturing Number Good ServiceIMPORTANT INFORMATION symbols and decalsXxxx xxxxxx xxxxxxxxxxxxxxxWhole body remove safetyremove key before performing anyTHIS CUTTING MACHINE IS CAPABLE SAFETYSafety Instructions SAFETY INSTRUCTIONS COULDAlways wear eye protection when operating machine Slope Operation Personal Safety EquipmentChildren There is risk for burns if touched Safe Handling of GasolineUse protective glasses for maintenance work General MaintenanceUse protective goggles Spark Arrestor TransportControl Locations CONTROLS4.Reverse Steering Control Levers1.Forward 2.Neutral 3.Neutral slot, Neutral lock Throttle Control Ignition SwitchParking Brake Risk for burns if touched Choke ControlRefueling Always use the high position F to transport Fuel Shut Off ValveMower Deck Lifting Lever Trackingthe engine stopped the ignition key removed Seat Adjustment LeverBlade Control Lever Manual TransportTo move forward and backward operationTraining SteeringStarting the Engine Before StartingMove the throttle to the middle position IMPORTANT INFORMATION To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MAINTENANCEPerform the 300-hourservice Check/adjust throttle cableClean/replace the spark plugs Check/adjust the mower deckAlways use two wrenches for the terminal screws BatteryTo clean battery and terminals Replacing batteryTire Pressures Safety SystemTo replace deck belt V-beltsDeck Belt Cutting Blades Belt installationBlade replacement EZT BeltLeveling Deck Adjusting the Mower Deck1.Engage the parking brake Caster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LUBRICATIONSteering Control Shafts Front Wheel MountFront Wheel Bearings Engine LubricationCause TROUBLESHOOTINGProblem The engine seems weak Winter Storage Servicestorage SCHEMATIC U.S. Standard Hardware TECHNICAL DATATorque Specifications HEX HEAD CAP SCREWSTransmission ZM3016 BFEngine Productivity Overall dimensionsRZ3019 BF EquipmentCE Requirements CONForMITY CERTIFICATESUSA Requirements SERVICE JOURNAL 25-HourService 100-HourService 50-HourServiceAt Least Once Each Year 300-HourServicePage 03/19/10 P/N 115 349327R1