McCulloch 966564001 Introduction, Congratulations, General, Driving and Transport on Public Roads

Page 5
INTRODUCTION

INTRODUCTION

Congratulations

Thank you for purchasing a McCulloch ride-on mower. This machine is built for superior efficiency to rapidly mow primarily large areas. A control panel easily accessible to the operator and a hydrostatic transmission regulated by steering controls both contribute to the machine’s performance.

This manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service, maintenance, etc.) by all who operate this machine is important for the safety of the operator and others. It can also considerably increase the life span of the machine and increase its resale value.

If you sell your machine, be sure to give the operator’s manual to the new owner.

The final chapter of this operator’s manual provides a Service Journal. Ensure that service and repair work are documented. A well-kept service journal reduces service costs for the maintenance and affects the machine’s resale value. Please contact your dealer for more information. Take the operator’s manual along when the machine is taken to your dealer for service.

General

In this operator’s manual, left and right, backward and forward are used in relation to the machine’s normal driving direction.

Continuous dedication to improve our products require that specifications and design are subject to change without notice.

Driving and Transport on Public Roads

Check applicable road traffic regulations before transporting on public roads. If the machine is transported, you must always use approved fastening equipment and ensure that the machine is well anchored. DO NOT operate this machine on public roadways.

Towing

If machine is equipped with a tow hitch, use extreme caution when towing. Never allow children or others in or on towed equipment.

Make wide turns to avoid jack-knifing. Travel slowly and allow extra distance to stop. Do not tow on sloped ground. The weight of the towed equipment may cause loss of traction and loss of control.

Follow the manufacturer’s recommendation for weight limits for towed equipment. Do not tow near ditches, canals, and other hazards.

Operating

This machine is constructed only for mowing grass on lawns and even ground without obstacles such as stones, tree stumps, etc. The machine can also be used for other tasks when equipped with special accessories provided by the manufacturer. Operating instructions for the accessories are provided with delivery. All other types of uses are incorrect. The manufacturer’s directions concerning operation, maintenance, and repairs must be carefully followed.

Lawn mowers and all power equipment, can be potentially dangerous if used improperly. Safety requires good judgement, careful use in accordance with these instructions and common sense.

The machine must only be operated, maintained, and repaired by persons familiar with the machine’s special characteristics and who are also knowledgeable about the safety instructions. Use only approved repair parts to maintain this machine.

Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic regulations must be followed without fail.

Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal injury or property damage.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ZM3016 BF Operator ManualIn order to implement improvements, specifications and designs can be altered without prior notification Contents Page Congratulations INTRODUCTIONGeneral Driving and Transport on Public RoadsManufacturing Number Good ServiceXxxx xxxxxx symbols and decalsxxxxxxxxxxxxxxx IMPORTANT INFORMATIONremove key before remove safetyperforming any Whole bodySafety Instructions SAFETYSAFETY INSTRUCTIONS COULD THIS CUTTING MACHINE IS CAPABLEAlways wear eye protection when operating machine Slope Operation Personal Safety EquipmentChildren There is risk for burns if touched Safe Handling of GasolineUse protective glasses for maintenance work General MaintenanceUse protective goggles Spark Arrestor TransportControl Locations CONTROLS4.Reverse Steering Control Levers1.Forward 2.Neutral 3.Neutral slot, Neutral lock Throttle Control Ignition SwitchParking Brake Risk for burns if touched Choke ControlRefueling Mower Deck Lifting Lever Fuel Shut Off ValveTracking Always use the high position F to transportBlade Control Lever Seat Adjustment LeverManual Transport the engine stopped the ignition key removedTraining operationSteering To move forward and backwardStarting the Engine Before StartingMove the throttle to the middle position IMPORTANT INFORMATION To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MAINTENANCEClean/replace the spark plugs Check/adjust throttle cableCheck/adjust the mower deck Perform the 300-hourserviceTo clean battery and terminals BatteryReplacing battery Always use two wrenches for the terminal screwsTire Pressures Safety SystemTo replace deck belt V-beltsDeck Belt Blade replacement Belt installationEZT Belt Cutting BladesLeveling Deck Adjusting the Mower Deck1.Engage the parking brake Removal and installation of caster wheel CleaningUse protective glasses when cleaning and washing Caster WheelsGeneral LUBRICATIONFront Wheel Bearings Front Wheel MountEngine Lubrication Steering Control ShaftsCause TROUBLESHOOTINGProblem The engine seems weak Winter Storage Servicestorage SCHEMATIC Torque Specifications TECHNICAL DATAHEX HEAD CAP SCREWS U.S. Standard HardwareTransmission ZM3016 BFEngine RZ3019 BF Overall dimensionsEquipment ProductivityCE Requirements CONForMITY CERTIFICATESUSA Requirements SERVICE JOURNAL 25-HourService 100-HourService 50-HourServiceAt Least Once Each Year 300-HourServicePage 03/19/10 P/N 115 349327R1
Top Page Image Contents