McCulloch 966564001, ZM3016 BF manual Service Journal

Page 51

	SERVICE JOURNAL


	Action	Date, mtr reading, stamp, sign

	Delivery Service	q
	Charge the battery.
		q
	Adjust the tire pressure of all wheels to 15 PSI (1 bar).
		q
	Mount the steering controls in the normal position.
		q
	Connect the contact box to the cable for the seat’s safety switch.
		q
	Check that the right amount of oil is in the engine.
		q
	Adjust the position of the steering controls.
		q
	Fill with fuel and open the fuel shut off valve.
		q
	Start the engine.
		q
	Check that there is drive to both wheels.
		q
	Check the mower deck adjustment.

	Check:	q
	The safety switch for the parking brake.
		q
	The safety switch for the mower deck.
		q
	The safety switch in the seat.
		q
	The safety switch in the steering controls.
		q
	Parking brake functionality.
		q
	Driving forward.
		q
	Driving backward.
		q
	Engaging the blades.
		q
	Check the idle speed
		q
	Check the engine high idle speed

	Inform the customer about:	q
	The need and advantages of following the service schedule.
		q
	The need and advantages of leaving the machine for service every

	300 hours.	q
	The effects of service and maintaining a service journal on the

	machine’s resale value.	q
	Application areas for Mulching.

	Fill in the sales papers, etc.	Delivery service has
		been carried out.
		No remaining notes.
		Certified:

51

Image 51

Contents ZM3016 BF Operator ManualIn order to implement improvements, specifications and designs can be altered without prior notification Contents Page Driving and Transport on Public Roads INTRODUCTIONCongratulations GeneralManufacturing Number Good ServiceIMPORTANT INFORMATION symbols and decalsXxxx xxxxxx xxxxxxxxxxxxxxxWhole body remove safetyremove key before performing anyTHIS CUTTING MACHINE IS CAPABLE SAFETYSafety Instructions SAFETY INSTRUCTIONS COULDAlways wear eye protection when operating machine Slope Operation Personal Safety EquipmentChildren There is risk for burns if touched Safe Handling of GasolineUse protective glasses for maintenance work General MaintenanceUse protective goggles Spark Arrestor TransportControl Locations CONTROLSSteering Control Levers 1.Forward 2.Neutral 3.Neutral slot, Neutral lock4.Reverse Ignition Switch Parking BrakeThrottle Control Choke Control RefuelingRisk for burns if touched Always use the high position F to transport Fuel Shut Off ValveMower Deck Lifting Lever Trackingthe engine stopped the ignition key removed Seat Adjustment LeverBlade Control Lever Manual TransportTo move forward and backward operationTraining SteeringStarting the Engine Before StartingMove the throttle to the middle position IMPORTANT INFORMATION To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MAINTENANCEPerform the 300-hourservice Check/adjust throttle cableClean/replace the spark plugs Check/adjust the mower deckAlways use two wrenches for the terminal screws BatteryTo clean battery and terminals Replacing batteryTire Pressures Safety SystemV-belts Deck BeltTo replace deck belt Cutting Blades Belt installationBlade replacement EZT BeltAdjusting the Mower Deck 1.Engage the parking brakeLeveling Deck Caster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LUBRICATIONSteering Control Shafts Front Wheel MountFront Wheel Bearings Engine LubricationTROUBLESHOOTING ProblemCause The engine seems weak Service storageWinter Storage SCHEMATIC U.S. Standard Hardware TECHNICAL DATATorque Specifications HEX HEAD CAP SCREWSZM3016 BF EngineTransmission Productivity Overall dimensionsRZ3019 BF EquipmentCONForMITY CERTIFICATES USA RequirementsCE Requirements SERVICE JOURNAL 25-HourService 100-HourService 50-HourServiceAt Least Once Each Year 300-HourServicePage 03/19/10 P/N 115 349327R1