McCulloch ZM3016 BF, 966564001 manual HourService, At Least Once Each Year

Page 54

	SERVICE JOURNAL


	Action	Date, mtr reading, stamp, sign

	300-Hour Service	q
	Perform the 25-hour service.
		q
	Perform the 50-hour service.
		q
	Perform the 100-hour service.
		q
	Check/adjust the mower deck.
		q
	Clean the combustion chamber and grind the valve seats.
		q
	Check the engine valve clearance.
		q
	Replace the air cleaner’s pre-filter (foam).


	Action	Date, mtr reading, stamp, sign

	At Least Once Each Year	q
	Clean the engine’s cooling air intake (25 hours).
		q
	Replace the air cleaner’s pre-filter (foam) (300 hours).
		q
	Replace the air filter’s paper cartridge.
		q
	Change the engine oil (50 hours).
		q
	Replace the engine oil filter (100 hours).
		q
	Check/adjust the cutting height.
		q
	Check/adjust the parking brake (50 hours).
		q
	Clean/Change the spark plugs (100 hours).
		q
	Change the fuel filter (100 hours).
		q
	Check the engine valve clearance.

Image 54

Contents Operator Manual ZM3016 BFIn order to implement improvements, specifications and designs can be altered without prior notification Contents Page General INTRODUCTIONCongratulations Driving and Transport on Public RoadsGood Service Manufacturing Numberxxxxxxxxxxxxxxx symbols and decalsXxxx xxxxxx IMPORTANT INFORMATIONperforming any remove safetyremove key before Whole bodySAFETY INSTRUCTIONS COULD SAFETYSafety Instructions THIS CUTTING MACHINE IS CAPABLEAlways wear eye protection when operating machine Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline There is risk for burns if touchedGeneral Maintenance Use protective glasses for maintenance workUse protective goggles Transport Spark ArrestorCONTROLS Control LocationsSteering Control Levers 1.Forward 2.Neutral 3.Neutral slot, Neutral lock4.Reverse Ignition Switch Parking BrakeThrottle Control Choke Control RefuelingRisk for burns if touched Tracking Fuel Shut Off ValveMower Deck Lifting Lever Always use the high position F to transportManual Transport Seat Adjustment LeverBlade Control Lever the engine stopped the ignition key removedSteering operationTraining To move forward and backwardBefore Starting Starting the EngineMove the throttle to the middle position operation Jumper cables To remove cables, reverse orderRunning Operating on Hills Mowing Tips Stopping the Engine operation MAINTENANCE Maintenance ScheduleCheck/adjust the mower deck Check/adjust throttle cableClean/replace the spark plugs Perform the 300-hourserviceReplacing battery BatteryTo clean battery and terminals Always use two wrenches for the terminal screwsSafety System Tire PressuresV-belts Deck BeltTo replace deck belt EZT Belt Belt installationBlade replacement Cutting BladesAdjusting the Mower Deck 1.Engage the parking brakeLeveling Deck Use protective glasses when cleaning and washing CleaningRemoval and installation of caster wheel Caster WheelsLUBRICATION GeneralEngine Lubrication Front Wheel MountFront Wheel Bearings Steering Control ShaftsTROUBLESHOOTING ProblemCause The engine seems weak Service storageWinter Storage SCHEMATIC HEX HEAD CAP SCREWS TECHNICAL DATATorque Specifications U.S. Standard HardwareZM3016 BF EngineTransmission Equipment Overall dimensionsRZ3019 BF ProductivityCONForMITY CERTIFICATES USA RequirementsCE Requirements SERVICE JOURNAL 25-HourService 50-HourService 100-HourService300-HourService At Least Once Each YearPage P/N 115 349327R1 03/19/10

300-Hour Service

At Least Once Each Year