McCulloch 966564001 Safety Instructions, This Cutting Machine Is Capable, General Operation

Page 9
SAFETY

SAFETY

Safety Instructions

These instructions are for your safety. Read them carefully.

WARNING!

THIS CUTTING MACHINE IS CAPABLE

OF AMPUTATING HANDS AND FEET

AND THROWING OBJECTS. FAILURE

TO OBSERVE THE FOLLOWING

SAFETY INSTRUCTIONS COULD

RESULT IN SERIOUS INJURY OR

DEATH.

General Operation

Read, understand, and follow all instructions on the machine and in the manual before starting.

Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

Be sure the area is clear of bystanders before operating. Stop machine if anyone enters the area.

Never carry passengers. The machine is only intended for use by one person.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and working

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

WARNING!

This symbol means that important safety instructions need to be emphasized. It concerns your safety.

8011-512

Read the operator’s manual before starting the machine

8011-513

Clear the area of objects before mowing

9

Image 9
Contents ZM3016 BF Operator ManualIn order to implement improvements, specifications and designs can be altered without prior notification Contents Page Congratulations INTRODUCTIONGeneral Driving and Transport on Public RoadsManufacturing Number Good ServiceXxxx xxxxxx symbols and decalsxxxxxxxxxxxxxxx IMPORTANT INFORMATIONremove key before remove safetyperforming any Whole bodySafety Instructions SAFETYSAFETY INSTRUCTIONS COULD THIS CUTTING MACHINE IS CAPABLEAlways wear eye protection when operating machine Slope Operation Personal Safety EquipmentChildren There is risk for burns if touched Safe Handling of GasolineUse protective glasses for maintenance work General MaintenanceUse protective goggles Spark Arrestor TransportControl Locations CONTROLSSteering Control Levers 1.Forward 2.Neutral 3.Neutral slot, Neutral lock4.Reverse Ignition Switch Parking BrakeThrottle Control Choke Control RefuelingRisk for burns if touched Mower Deck Lifting Lever Fuel Shut Off ValveTracking Always use the high position F to transportBlade Control Lever Seat Adjustment LeverManual Transport the engine stopped the ignition key removedTraining operationSteering To move forward and backwardStarting the Engine Before StartingMove the throttle to the middle position IMPORTANT INFORMATION To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MAINTENANCEClean/replace the spark plugs Check/adjust throttle cableCheck/adjust the mower deck Perform the 300-hourserviceTo clean battery and terminals BatteryReplacing battery Always use two wrenches for the terminal screwsTire Pressures Safety SystemV-belts Deck BeltTo replace deck belt Blade replacement Belt installationEZT Belt Cutting BladesAdjusting the Mower Deck 1.Engage the parking brakeLeveling Deck Removal and installation of caster wheel CleaningUse protective glasses when cleaning and washing Caster WheelsGeneral LUBRICATIONFront Wheel Bearings Front Wheel MountEngine Lubrication Steering Control ShaftsTROUBLESHOOTING ProblemCause The engine seems weak Service storageWinter Storage SCHEMATIC Torque Specifications TECHNICAL DATAHEX HEAD CAP SCREWS U.S. Standard HardwareZM3016 BF EngineTransmission RZ3019 BF Overall dimensionsEquipment ProductivityCONForMITY CERTIFICATES USA RequirementsCE Requirements SERVICE JOURNAL 25-HourService 100-HourService 50-HourServiceAt Least Once Each Year 300-HourServicePage 03/19/10 P/N 115 349327R1