McCulloch ZM3016 BF General Maintenance, Use protective glasses for maintenance work, Safety

Page 14
General Maintenance

SAFETY

General Maintenance

Never operate machine in a closed area.

Keep all nuts and bolts tight to be sure the equipment is in safe working condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep machine free of grass, leaves, or other debris buildup. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing.

If the machine strikes a foreign object, stop and inspect the machine. Repair, if necessary, before restarting.

Never make any adjustments or repairs with the engine running.

Check grass catcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, when necessary.

Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Adjust and service as required.

Maintain or replace safety and instruction labels, as necessary.

Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven with defective or unmounted protective plates, protective cowlings, safety switches, or other protective devices.

Do not change the settings of governors and avoid running the engine with overly high engine speeds. If the engine runs too fast, there is risk for damaging the machine components.

Be very careful when handling battery acid. Acid on skin can cause serious corrosive burns. If battery acid is spilled on skin, rinse immediately with water.

Acid in the eyes can cause blindness, contact a doctor immediately.

Be careful when servicing the battery. Explosive gases form in the battery. Never perform maintenance on the battery when smoking or near open flames or sparks.

The battery can explode and cause serious injury or damage.

Ensure that the equipment is in good condition and that all nuts and bolts, especially those fastening the blade attachments, are properly tightened and torqued.

8011-515

Never drive the machine in an enclosed space

WARNING!

Use protective glasses for maintenance work.

WARNING!

The battery contains lead and lead compounds, chemicals that are considered to cause cancer, birth defects, and other reproductive system damage. Wash your hands after handling the battery.

14

Image 14
Contents Operator Manual ZM3016 BFIn order to implement improvements, specifications and designs can be altered without prior notification Contents Page General INTRODUCTIONCongratulations Driving and Transport on Public RoadsGood Service Manufacturing Numberxxxxxxxxxxxxxxx symbols and decalsXxxx xxxxxx IMPORTANT INFORMATIONperforming any remove safetyremove key before Whole bodySAFETY INSTRUCTIONS COULD SAFETYSafety Instructions THIS CUTTING MACHINE IS CAPABLEAlways wear eye protection when operating machine Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline There is risk for burns if touchedGeneral Maintenance Use protective glasses for maintenance workUse protective goggles Transport Spark ArrestorCONTROLS Control Locations4.Reverse Steering Control Levers1.Forward 2.Neutral 3.Neutral slot, Neutral lock Throttle Control Ignition SwitchParking Brake Risk for burns if touched Choke ControlRefueling Tracking Fuel Shut Off ValveMower Deck Lifting Lever Always use the high position F to transportManual Transport Seat Adjustment LeverBlade Control Lever the engine stopped the ignition key removedSteering operationTraining To move forward and backwardBefore Starting Starting the EngineMove the throttle to the middle position operation Jumper cables To remove cables, reverse orderRunning Operating on Hills Mowing Tips Stopping the Engine operation MAINTENANCE Maintenance ScheduleCheck/adjust the mower deck Check/adjust throttle cableClean/replace the spark plugs Perform the 300-hourserviceReplacing battery BatteryTo clean battery and terminals Always use two wrenches for the terminal screwsSafety System Tire PressuresTo replace deck belt V-beltsDeck Belt EZT Belt Belt installationBlade replacement Cutting BladesLeveling Deck Adjusting the Mower Deck1.Engage the parking brake Use protective glasses when cleaning and washing CleaningRemoval and installation of caster wheel Caster WheelsLUBRICATION GeneralEngine Lubrication Front Wheel MountFront Wheel Bearings Steering Control ShaftsCause TROUBLESHOOTINGProblem The engine seems weak Winter Storage Servicestorage SCHEMATIC HEX HEAD CAP SCREWS TECHNICAL DATATorque Specifications U.S. Standard HardwareTransmission ZM3016 BFEngine Equipment Overall dimensionsRZ3019 BF ProductivityCE Requirements CONForMITY CERTIFICATESUSA Requirements SERVICE JOURNAL 25-HourService 50-HourService 100-HourService300-HourService At Least Once Each YearPage P/N 115 349327R1 03/19/10