McCulloch 966564001, ZM3016 BF Fuel Shut Off Valve, Mower Deck Lifting Lever, Tracking, Controls

Page 21

Fuel Shut Off Valve

CONTROLS

Fuel Shut Off Valve

The fuel shut off valve is located in the fuel line under the seat. Tilt seat forward for access. The fuel valve is ON when the valve is parallel to the fuel line. Rotate the valve ¼ turn clockwise to turn fuel OFF.

IMPORTANT INFORMATION

In order to obtain an even cutting height, it is important that the air pressure is 15 psi in all tires.

Mower Deck Lifting Lever

The lifting lever is used to place the mower deck in the transport position or one of the 6 different cutting height positions.

The cutting height is set by placing a lever in the notch for the desired cutting height.

The lifting lever can also be used to temporarily adjust the cutting height, such as when passing a minor bump in the lawn.

IMPORTANT INFORMATION

Always use the high position (F) to transport.

Tracking

If the mower is not tracking straight, check the air pressure in both rear tires. Recommended air pressure is 15 psi. (1 bar) Tracking must be checked on a flat and level concrete or blacktop surface.

If the unit still does not track straight contact your McCulloch workshop for adjustments.

8050-010

Fuel shut off valve in the OPEN position.

8058-085

The mower deck’s lifting lever

21

Image 21

Contents ZM3016 BF Operator ManualIn order to implement improvements, specifications and designs can be altered without prior notification Contents Page Congratulations INTRODUCTIONGeneral Driving and Transport on Public RoadsManufacturing Number Good ServiceXxxx xxxxxx symbols and decalsxxxxxxxxxxxxxxx IMPORTANT INFORMATIONremove key before remove safetyperforming any Whole bodySafety Instructions SAFETYSAFETY INSTRUCTIONS COULD THIS CUTTING MACHINE IS CAPABLEAlways wear eye protection when operating machine Slope Operation Personal Safety EquipmentChildren There is risk for burns if touched Safe Handling of GasolineUse protective glasses for maintenance work General MaintenanceUse protective goggles Spark Arrestor TransportControl Locations CONTROLSSteering Control Levers 1.Forward 2.Neutral 3.Neutral slot, Neutral lock4.Reverse Ignition Switch Parking BrakeThrottle Control Choke Control RefuelingRisk for burns if touched Mower Deck Lifting Lever Fuel Shut Off ValveTracking Always use the high position F to transportBlade Control Lever Seat Adjustment LeverManual Transport the engine stopped the ignition key removedTraining operationSteering To move forward and backwardStarting the Engine Before StartingMove the throttle to the middle position IMPORTANT INFORMATION To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MAINTENANCEClean/replace the spark plugs Check/adjust throttle cableCheck/adjust the mower deck Perform the 300-hourserviceTo clean battery and terminals BatteryReplacing battery Always use two wrenches for the terminal screwsTire Pressures Safety SystemV-belts Deck BeltTo replace deck belt Blade replacement Belt installationEZT Belt Cutting BladesAdjusting the Mower Deck 1.Engage the parking brakeLeveling Deck Removal and installation of caster wheel CleaningUse protective glasses when cleaning and washing Caster WheelsGeneral LUBRICATIONFront Wheel Bearings Front Wheel MountEngine Lubrication Steering Control ShaftsTROUBLESHOOTING ProblemCause The engine seems weak Service storageWinter Storage SCHEMATIC Torque Specifications TECHNICAL DATAHEX HEAD CAP SCREWS U.S. Standard HardwareZM3016 BF EngineTransmission RZ3019 BF Overall dimensionsEquipment ProductivityCONForMITY CERTIFICATES USA RequirementsCE Requirements SERVICE JOURNAL 25-HourService 100-HourService 50-HourServiceAt Least Once Each Year 300-HourServicePage 03/19/10 P/N 115 349327R1