RULES FOR SAFE OPERATION
KNOW YOUR UNIT |
| 6 7 |
1 | 4 | 16 |
2 |
|
|
| 3 |
|
|
|
21 | 12 | 13 | 14 | 15 |
| ||||
|
| |||
9 | 8 | 5 |
|
|
|
|
| ||
10 |
|
|
|
|
22
11
15
18 20 17 19
CHAIN SAW COMPONENTS
1.GUIDE BAR
2.SAW CHAIN
3.SAW CHAIN ADJUSTMENT SCREW
4.SPARK ARRESTER SCREEN
5.CHAIN BRAKE® LEVER /HAND GUARD
6.FRONT HANDLE
7.STARTER HANDLE
8.SPARK PLUG
9.AIR CLEANER COVER
10.STOP SWITCH
11.SAFETY TRIGGER
12.OIL TANK CAP
13.STARTER COVER
14.FUEL TANK CAP
15.REAR HANDLE / BOOT LOOP
16.BLUE CHOKE LEVER
17.BAR RETAINING NUT
18.THROTTLE / TRIGGER
19.CHAIN CATCHER
20.CHAIN BRAKE® COVER
21.SCREWDRIVER / WRENCH
22.CARRY CASE (Available on some models)
SAFETY FEATURES
Numbers preceding the descriptions correspond with the numbers above to help you locate the safety feature.
2LOW KICKBACK SAW CHAIN helps significantly reduce kickback, or the intensity of kickback, due to specially designed depth gauges and guard links.
4SPARK ARRESTER SCREEN retains carbon and other flammable particles over 0.023 inches (0.6mm) in size from engine exhaust flow. Compliance with local, state and federal laws and/or regulations governing the use of a spark arrester screen is the user’s responsibility. See Safety Precautions for additional information.
5CHAIN BRAKE® LEVER / HAND GUARD protects the operator’s left hand in the event it slips off the front handle while saw is running.
5CHAIN BRAKE® is a safety feature designed to reduce the possibility of injury due to kickback by stopping a moving saw chain in milliseconds. It is activated by the CHAIN BRAKE® lever.
10STOP SWITCH immediately stops the engine when tripped. Stop switch must be pushed to ON position to start or restart engine.
11SAFETY TRIGGER prevents accidental acceleration of the engine. Throttle trigger (19) cannot be squeezed unless the safety latch is depressed.
20CHAIN CATCHER reduces the danger of injury in the event saw chain breaks or derails during operation. The chain catcher is designed to intercept a whipping chain.
7