Multiquip DCA-500SSK operation manual Reading the Output Terminal Gauges, AC Voltmeter

DCA-500SSK — OUTPUTTERMINAL

Reading the Output Terminal Gauges

The gauges and knobs on the control panel DO NOT effect the generator output. They are to help the operator observe how much power supply is produced at the UVWO legs.

To read the output at the U-W legs, place the AC Voltmeter Change-over switch to the W-U position and the AC ammeter Change-over Switch to the U or W position to read the output on the selected leg.

Figure 15. AC Voltmeter	Figure 16. AC
Change-Over Switch	Voltmeter Gauge
(Reading the W-U leg	(Voltage reading on
on the output terminal	W-U lug)
Panel

Figure 17. AC Ammeter	Figure 18. AC
Change-Over Switch	Ammeter Gauge
(Reading the W-U leg	(Amp reading on U
on the output terminal	lug)
Panel

DCA-500SSK — PARTS AND OPERATION MANUAL (STD)— REV. #1 (04/14/01) — PAGE 39