Patent Design Registra Tion, Service | Mountfield 4135H, 4155 H 4WD

ENGLISH

3.Dismantle the filter assembly (26:B). The pre- filter is placed over the air filter. Make sure that no dirt gets into the carburettor. Clean the air fil- ter housing.

4.Clean the paper filter by tapping it gently against a flat surface. If the filter is very dirty, replace it.

5.Clean the pre-filter. If the filter is very dirty, re- place it.

6.Assemble in the reverse order.

Compressed air or petroleum-based solvents such as kerosene may not be used for cleaning the paper filter insert. This will damage the filter.

8.10 Spark plug

The spark plug(s) must be replaced every 200 hours of operation (=at every other basic service). Before disconnecting the spark plug, clean around its mounting.

Spark plug: Champion RC12YC or equivalent.

Electrode distance: 0.75 mm.

8.11 Air intake

See 19:T. The engine is air-cooled. A blocked cooling system can damage the engine. Clean the engine’s air intake after 50 hours of operation. More meticulous cleaning of the cooling system is carried out during each basic service.

8.12 Lubrication

All lubrication points in accordance with the table below must be lubricated every 50 hours of opera- tion as well as after every wash.

Object	Action	Figure
Centre point	4 grease nipples.	28
	Use a grease gun filled with
	universal grease. Pump until
	the grease emerges.
Steering	Brush the chains clean with	-
chains	a wire brush.
	Lubricate with universal
	chain spray.
Tensioning	Lubricate the bearing points	29
arms	with an oil can when each
	control is activated.
	Ideally carried out by two
	people.
Control	Lubricate the cable ends	29
cables	with an oil can when each
	control is activated.
	Must be carried out by two
	people.

8.13 Fuse

In the event of electrical faults, check/replace the fuse, 20 A. See 20:S.

9 PATENT - DESIGN REGISTRA-

TION

This machine or parts thereof is covered by the fol- lowing patent and design registration: SE9901091-0, SE9901730-3, SE9401745-6, US595 7497, FR772384, DE69520215.4, GB772384, SE0301072-5, SE04/000239 (PCT), SE0401554-1, SE0501599-5.

10 SERVICE

Authorised service workshops carry out repairs and guarantee service. They use original spare parts.

Original spare parts are supplied by service workshops and by Many dealers.

We recommend that the machine be handed in to an authorised service workshop for service, maintenance and checking of the safety devices once a year.

11 PURCHASE TERMS

A full guarantee is issued against Manufacturing and material defects. The user must carefully fol- low the instructions given in the enclosed docu- mentation.

Guarantee period

For consumer use: two years from purchase date.

For batteries: six months from the purchase date.

Exceptions

The guarantee does not cover damage due to:

- neglect of the user to acquaint himself with ac- companying documentation

-carelessness

-incorrect and non-permitted use or assembly

-the use of non-genuine spare parts

-the use of accessories not supplied or approved by GGP

Neither does the guarantee cover:

-wearing components such as blades, belts, wheels and cables

-normal wear

-engine and transmission. These are covered by the appropriate Manufacturer’s guarantees with separate terms and conditions.

The purchaser is covered by each country’s national laws. The rights to which the purchaser is entitled with the support of these laws are not restricted by this guarantee.