IBM 1400 (2611) Beep Symptoms, No Beep Symptoms

Error
Code Message FRU/Action in Sequence
006 Equipment
Configuration
Error
Ensure the equipment
(diskette drive, hard
disk drive, keyboard,
external mouse, etc.) is
connected properly
and is correctly set in
the BIOS Utility.
Hard disk connection
board
Hard disk drive
Systemboard
System Operation (Runtime)
103 Press <Esc>
to turn off NMI
or other key to
reboot
Enter BIOS Utility and
execute "Load Setup
Default Settings"; then
reboot the system.
Remove the non-
factory-installed
adapter card and
reboot the system.
Beep Symptoms
Symptom/Error FRU/Action in Sequence
Five short beeps,
power-on indicator
turns on then off and
LCD is blank.
Ensure that "System Boot
Drive" in the "System Secu-
rity" menu of the BIOS Utility
is not set to [Drive A].
Battery
Four short beeps
every minute and
system doesn't enter
hibernation mode.
Go to “Hibernation Mode” on
page 35.
Hard disk connection board
Hard disk drive
Systemboard
No Beep Symptoms
38 ThinkPad i Series 1400 HMM