DIGITAL VIDEO RECORDER
6Attaching/Detaching HDD
Mounting HDD
POWER
REC REC LOCK | VCR | SEAR |
ALARM LAN CHECK ARCHIVE
POWER
REC REC LOCK | VCR | SEA |
ALARM LAN CHECK ARCHIVE
1.First, open the hard drive rack cover on the front of the main unit. Next, open the lock on the front of the rack with the key.
H.D.D.
Lift up
2.Remove the hard drive rack from the main unit by lifting up the handle on the front of the rack and pulling straight out.
H.D.D.
Lift up
5.Lift up the rack's front handle and push the rack into the main unit. Once the hard drive rack is fully inserted into the main unit, lower the front handle to secure it
6.Lock the hard drive rack with the key, and then turn on the power.
Note
When installing a HDD into the hard drive rack, be sure to set the HDD as Master mode. Otherwise, the system will not recognize the HDD. For instructions on how to set the HDD as Master mode, please refer to the HDD's manual. For example, for a Samsung Spinpoint V80 HDD, set the mode as follows:
H.D.D.
3. Connect the removable rack's | 4. Slide your hard drive into the |
data cable and power cord to | removable rack and fasten with |
your hard drive. | screws. |
Master Mode
Be sure to lock the hard drive rack in place for normal operation of the system. Unless the hard drive rack is locked, the system cannot recognize your hard drive.
When removing the hard drive rack, be sure to wait until your hard drive's power LED goes off. When replacing your hard drive with another one, be sure to turn off the sys- tem's power. If you replace your hard drive with the power on, your hard drive may malfunction or be damaged.
If you want to use a hard drive from another machine, be sure to format it from a PC before using it. The system may not work normally if you use it without formatting it first. Hard disk drives recommended for use with the DVR COMBO are Samsung Spinpoint SV0802N and SEAGATE Barracuda 7200.7 80G.