Samsung SCR-3000P Live Screen Viewing, Viewing Screen during recording

DIGITAL VIDEO RECORDER

Live Screen Viewing

The normal Live screen looks like this.

2003-06-25 04:30:00

If system is in the recording state icon will blink. However, it does not blink in the Live Screen state.

Indicates whether a HDD is installed or whether the hard drive rack is locked.

It shows the relative location of the recorded data inside the hard disk.

2003-06-25 04:30:00 It shows the current date and time as configured by the system.

Viewing Screen during recording

The normal recording screen looks like this.

2003-06-25 04:30:00

If the system is executing the recording function, icon blinks.

If the system is in the recording state due to alarm, icon appears. In this state, icon continually blinks.

If the system is in the recording state due to Motion Detection, icon appears.

In this state, icon continually blinks.

	If the system is in the recording state due to the timer,		icon appears.
	If the system in the recording lock state,	icon appears.
	It occurs when the system is connected to remote viewer program through the LAN.
	Indicates whether a HDD is installed or whether the hard drive rack is locked.
	It shows the relative location of the recorded data inside the hard disk.
2003-06-25 04:30:00	Indicates the current date and time of the system.
	The position of the date and time display on the screen can be changed. The date and
	time can be displayed either at the top left or top right of the screen.
	(Select either LEFT or RIGHT in DATE & TIME DISPLAY of the CLOCK/DISPLAY
	MODE SETUP menu. For details, see page 4-6.)

3-5 3-6