Samsung SCR-3000P 2MANUAL ARCHIVE, Note, (1)FROM RECORD EVENT LIST

DIGITAL VIDEO RECORDER

2MANUAL ARCHIVE

The following illustration shows the initial settings of the MANUAL ARCHIVE menu.

MANUAL ARCHIVE

FROM RECORD EVENT LIST

FROM ALARM EVENT LIST

FROM MOTION EVENT LIST

TIME RANGE

DIRECT ARCHIVE

PICTURE SAMPLING RATE 1/1

MOVE=[ /❷/➛/❿] SELECT=[ ] EXIT=[MENU]

(1)FROM RECORD EVENT LIST

If you have pressed the RECORD button on the main unit to record on the hard drive or if you have recorded for a long time, the event list will be updated at a certain interval of time. FROM RECORD EVENT LIST allows you to use this list to perform the backup, more conveniently than using TIME RANGE. The following illustration shows the FROM RECORD EVENT LIST screen in detail. The EVENT (RECORD), DATE and TIME indicate when the event was recorded on the hard drive. To exit this screen and return to the MANUAL ARCHIVE menu, press the MENU button.

RECORD EVENT ARCHIVE		[1/7]
ID EVENT	DATE	TIME

01 RECORD 2003-07-13 09:23:55 [X]

02 RECORD 2003-07-12 13:43:21 [X]

03 RECORD 2003-07-12 11:13:42 [X]

04 RECORD 2003-07-11 09:23:55 [X]

05 RECORD 2003-07-11 05:11:42 [X]

06 RECORD 2003-07-10 23:51:12 [X]

07 RECORD 2003-07-10 13:37:48 [X]

MOVE=[ /❷/➛/❿] START=[REC] EXIT=[MENU]

Use the LEFT( ➛ ), RIGHT( ❿ ), UP( ) and DOWN( ❷ ) buttons to select the event you want to back up.

A highlighted cursor should appear over the selected item. Press the ENTER button ( ) to accept

the choice. The selected event will be indicated by "[O]". Repeat this procedure for each event you want to back up, and then press the RECORD ( REC ) button to start the backup. The earliest event occurrence will be backed up first.

Once the backup starts, the following information will be displayed.

Event Index
MACHINE		: SCR-3000 MACHINE 1
RECORD START		: 2003-06-14		09:45:28
CH	No.	:	1
REC	MODE	:	60.00 FPS
ARCHIVING START		: 2003-06-14		09:55:35

ARCHIVING METHOD : MANUAL

ARCHIVE

2003-06-14 09:45:45

-MACHINE : "SCR-3000/SSC-Dual MACHINE 1" is the ID for the RS-485 connection.

-RECORD START : The date and time when the data you want to back up was recorded.

-CH No. : The input channel number of the data that you want to back up.

-REC MODE : The picture sampling rate of the recorded data that you want to back up

-ARCHIVING START : Backup start time.

-ARCHIVING METHOD : MANUAL ARCHIVE Method [MANUAL/TIMER/DIRECT]

Note

In REC Mode - that is, if the picture rate of the data to be backed up is less than 15FPS(for NTSC) or 12.5FPS(for PAL) - no audio will be backed up.

5-3 5-4