Samsung SCR-3000P 4Alarm Record Retrieval, 5Searching Motion Detection Recordings, Note, Note, Other information is same as in “3. Recorded Data List View” on p

DIGITAL VIDEO RECORDER

4Alarm Record Retrieval

ALARM EVENT SEARCH			[01/03]
ID	EVENT	DATE	TIME

01ALARM START 2003-07-13 17:25:52

02ALARM START 2003-07-12 06:37:38

03ALARM START 2003-07-11 11:54:34

MOVE=[ /❷/➛/❿] SELECT=[ ] EXIT=[SEARCH]

Among the data on the HDD, the ones that were recorded when an alarm was triggered will be

displayed as a list based on the recording start time.

Other information is same as in “3. Recorded Data List View” on p. 7-4.

Note

If the list of the recorded data cannot be shown in a screen, you can use the LEFT(➛ ) or RIGHT(❿) button to view the list in pages. Press the LEFT(➛) button to move to the previous page, or press the RIGHT( ❿) button to move to the next page.

5Searching Motion Detection Recordings

MOTION EVENT SEARCH			[01/03]
ID	EVENT	DATE	TIME

01 MOTION START 2003-07-13 22:42:16

02 MOTION START 2003-07-12 14:24:45

03 MOTION START 2003-05-11 06:13:52

MOVE=[ /❷/➛/❿] SELECT=[ ] EXIT=[SEARCH]

Of those data recorded on the HDD, the ones recorded by motion detection will be listed in order of recording start time. Other information is same as in "3. Viewing the Recorded Data List" on page 7-4.

Note

-If the list of the recorded data cannot be shown in a screen, you can use the LEFT(➛ ) or RIGHT(❿) button to view the list in pages. Press the LEFT(➛) button to move to the previous page, or press the RIGHT( ❿) button to move to the next page.

-In DVR MENU, if MULTIPLEXER of SYSTEM SETUP is set to WITH, MOTION EVENT SEARCH of SEARCH MENU will be disabled.

7-5 7-6