3Com 10002211 manual Displaying Routes

A-8 APPENDIX A: IP MULTICAST ROUTING

Removing a Multicast Tunnel

Top-Level Menu						1
system
ethernet		interface
fddi		route	dvmrp
tokenring		arp	igmp		display		2
bridge	➧multicast
➧ip			interface		define
		udpHelper	➧tunnel	➧remove
ipx
		routing
			routeDisplay
appletalk		icmpRouterDiscovery
snmp		rip	cacheDisplay
analyzer		ping
script		statistics				3
logout

To remove an IP multicast tunnel:

From the top level of the Administration Console, enter:

ip multicast tunnel remove

Enter the slot(s) of the switching module for which you want to remove a multicast tunnel.

Select IP stack(s) by slot (2,3,7,9-12all) [12]:

Enter the index number(s) of the interfaces associated with the tunnel you want to remove.

Enter multicast tunnel index [1]: 2

						The tunnel is removed.
Displaying Routes						To display all available routes in the IP multicast routing table:
	Top-Level Menu				1	From top level of the Administration Console, enter:
	system					ip multicast routeDisplay
	ethernet		interface
	fddi		route	dvmrp
	tokenring	arp		igmp	2	Enter the slot(s) of the switching module for which you want to view IP
	bridge	➧multicast		interface
	➧ip					multicast routes.
			udpHelper	tunnel
	ipx		routing	➧routeDisplay
	appletalk			cacheDisplay		Select IP stack(s) by slot (2,3,7,9-12all) [12]:
	snmp		rip
	analyzer		ping
	script		statistics		3 The DVMRP and IGMP status appear on the screen.
	logout
						Slots 9-12 - DVMRP is disabled, IGMP snooping is enabled