3Com 10002211 manual Information for an HSI Switch Engine

Defining VLAN Information for an HSI Switch Engine D-5

9Enter the subnetwork mask.

Example:

menu option (bridge/vlan): define

Select bridge(s) by slot (2-3,5,7,9-12) [2]: 5

Enter Protocol Suite (IP,IPX,Apple,XNS,DECnet,SNA,

Vines,X.25,NetBIOS,default): IP

Enter Integer VLAN Identifier: 1

Enter VLAN Name: SD Marketing

Ports 1-2=FDDI, 3-18=Ethernet

Enter	port(s)		(1-18all): 1,3-5
Layer	3	Address	(undefined, defined): defined
Enter	IP	Subnet	Address: 158.111.122.0
Enter	subnet mask [255.255.0.0] 255.255.255.0

The maximum number of VLANs you can define on a single bridge is 32.

Defining VLAN Follow these steps to create a VLAN definition:

Information for

an HSI Switch

Engine

1 From the top level of the Administration Console, enter:

Top-Level Menu

system
ethernet
fddi	display
tokenring	mode
➧bridge	lowLatency
ip	ipFragmentation
ipx	ipxSnapTranslation
appletalk	trFDDIMode
snmp	addressThreshold
analyzer	agingTime		summary
script	stpState
			detail
logout	stpPriority
		➧define
	stpMaxAge
			modify
	stpHelloTIme
			remove
	stpForwardDelay
	stpGroupAddress
	srBridgeNumber
	port
	packetFilter
	➧vlan

bridge vlan define

2Enter the slot number for the bridge.

3Enter the appropriate protocol suite: (IP,IPX,Apple,XNS,

DECnet,SNA,Vines,X.25,NetBIOS,default)

4Enter the integer of the VLAN interface identifier.

5Enter the VLAN name.

6Enter the number(s) of the port(s) or all to assign all ports on the bridge in the specified slot to the VLAN.

You are prompted to enter the number(s) of the port(s) that can be assigned to the VLAN.