3Com 10002211 Defining VLAN, Information for a, Traditional Bridge, SNA,Vines,X.25,NetBIOS,default

D-4 APPENDIX D: ADMINISTERING VLANS

Defining VLAN	Follow these steps to create a VLAN definition for a traditional bridge, such
Information for a	as an EFSM or a TMM:
Traditional Bridge

Top-Level Menu

system
ethernet
fddi	display
tokenring	mode
➧bridge	lowLatency
ip	ipFragmentation
ipx	ipxSnapTranslation
appletalk	trFDDIMode
snmp	addressThreshold
analyzer	agingTime	summary
script	stpState
		detail
logout	stpPriority
		➧define
	stpMaxAge	modify
	stpHelloTIme
	stpForwardDelayremove
	stpGroupAddress
	srBridgeNumber
	port
	packetFilter
	➧vlan

1From the top level of the Administration Console, enter:

bridge vlan define

2Enter the slot number for the bridge.

3Enter the appropriate protocol suite: (IP,IPX,Apple,XNS,DECnet,

SNA,Vines,X.25,NetBIOS,default)

4Enter the integer of the VLAN interface identifier.

5Enter the VLAN name.

6Enter the number(s) of the port(s) or all to assign all ports to the VLAN.

You are prompted to enter the number(s) of the port(s) that can be assigned to the VLAN.

If you did not choose the IP protocol suite for this VLAN, you have completed the steps for defining the VLAN.

If you selected the IP protocol suite, follow these steps:

7Enter defined to use layer 3 subnet addressing and continue with steps 2 and 3, OR enter undefined to not use layer 3 addressing.

8Enter the IP subnet address.