3Com 10002211 manual The following display shows all available multicast routes

Displaying Routes A-9

The following display shows all available multicast routes:

Multicast Routing Table (2598 entries)
Origin-Subnet	From-Gateway	Metric Tmr		In-If Out-Ifs
157.88.29.1/32	137.39.229.98	18	25	T1	I1
137.39.2.254/32	137.39.229.98	5	25	T1	I1
131.215.125.236/32	137.39.229.98	14	25	T1	I1
130.118.106.254/32	137.39.229.98	10	25	T1	I1
129.127.118.12/32	137.39.229.98	10	25	T1	I1
129.127.110.12/32	137.39.229.98	10	25	T1	I1
129.127.110.11/32	137.39.229.98	13	25	T1	I1
129.127.110.5/32	137.39.229.98	10	25	T1	I1
129.95.63.12/32	137.39.229.98	13	25	T1	I1
129.95.63.11/32	137.39.229.98	31	25	T1	I1*
129.95.63.9/32	137.39.229.98	13	25	T1	I1
129.95.63.8/32	137.39.229.98	13	25	T1	I1
129.95.63.6/32	137.39.229.98	13	25	T1	I1
129.95.63.2/32	137.39.229.98	13	25	T1	I1
129.95.48.4/32	137.39.229.98	13	25	T1	I1
129.95.48.3/32	137.39.229.98	13	25	T1	I1
129.95.48.2/32	137.39.229.98	13	25	T1	I1

Table A-1describes the fields in the route display.

Table A-1 Field Attributes for Multicast Route Display

Field	Description
Origin-Subnet	The source address and the number of bits in the subnetwork
From-Gateway	The interface address of the gateway
Metric	The hop count
Tmr	The amount of time, in seconds, since the routing table entry was
	last reset
In-If1	Interface number on which that gateway is connected. Traffic is
	expected to originate from this interface.
	T represents the tunnel; P denotes that a prune has been sent to
	this tunnel.
Out-If1	Set of interfaces that the traffic will be flooded out on. I repre-
	sents the interface.
1In-If and Out-If	Together, these attributes define a Spanning Tree configuration.
	The system disables interfaces that comprise loops.