3Com 2500 manual ip atmArpServer define, Select ATM port Enter IP address Enter subnet mask

9-16 CHAPTER 9: ADMINISTERING IP ROUTING

Defining an ATM Determine the location of the ATM ARP server you want to use. You can ARP Server define the ATM ARP server externally on another LANplex system or on an

ATM switch, such as 3Com’s CELLplex™ 7000 system.

Top-Level Menu

system
ethernet
		interface
fddi		route
atm
		arp
bridge				display
	➧atmArpServer
➧ip		multicast	➧define
ipx				remove
		udpHelper
appletalk				arp
	routing
snmp		icmpRouterDiscovery
analyzer
		rip
script		ping
logout
		statistics

1To define an ATM ARP server, from the top level of the Administration Console, enter:

ip atmArpServer define

2Enter the number of the ATM port where you want to define the ATM ARP server.

3Enter the IP address of the ATM port you want to define.

4Enter the subnet mask. To accept the default value, shown in brackets, press the [Return] key at the prompt.

Example:

Select ATM port [1]

Enter IP address: 158.101.20.30

Enter subnet mask [255.255.0.0]

Removing an ATM ARP Server

Top-Level Menu

system
ethernet
		interface
fddi		route
atm
		arp	display
bridge
	➧atmArpServer
			define
➧ip		multicast	➧remove
ipx
		udpHelper	arp
appletalk
	routing
snmp		icmpRouterDiscovery
analyzer
		rip
script		ping
logout
		statistics

To delete a currently defined ATM ARP server, from the top level of the Administration Console, enter:

ip atmArpServer remove

The systems prompts you for one or more index numbers associated with the ATM ARP servers that you want to remove. The ATM ARP server display shows the index number assigned to each ATM ARP server. The system also displays the current index numbers in the prompt.

Example:

Select ATM ARP server index(es) [1-2,all]: 1