DUA1640-5AAA02
7-12 CHAPTER 7: MANAGEMENT USING THE WEBINTERFACE
Management
Address
This page specifies a unique IP address for the stack, as shown in
Figure7-8.
If you have no previous knowledge of IP, refer to “IP Addresses” on
page 5-7. If you change any of these values, you may need to re -access
the hub using the new values.
Figure 7-8 Management Address Page
The fields are:
IP Address Provides a box for you to type the IP address of the stack.
Network Mask Provides a box for you to type the subnet mask for the
IP address.
Default Router Provides a box for you to type the IP address of the
default router (if you have one) which is used b y the stack to
communicate with other networks.
BOOTP Disabled / Enabled
Specifies whether you want your BOOTP server (if you have one) to
automatically allocate the stack an IP address and subnet mask.