DUA1640-5AAA02
Installing Quick Config Manager and the LoadBalancing Tool B-3
Installation
Procedure
Quick Config Manager can be installed o n its own or onto a
workstation that already has other Transcend ma nagement applications
installed.
CAUTION: Do not install Quick Conf ig Manager in the same directory
as any previously installed Transcend management applications. Quick
Config Manager and the Load Balancin g Tool are installed in
subdirectories (QCM and LOADBAL) under the default directory of
C:\TRANSCND. You can change the default director y during installation
if required.
If you have an earlier version of Qui ck Config Manager on your system,
you can simply install this version over it.
The installation program is a standard Windows ba sed installation.
Toinstall Quick Config Manager:
1Start Microsoft Windows.
If you already have an existing Transcend management application
running, ensure that it is closed down.
2Insert the CD-ROM into your CD-ROM drive.
3Depending on your version of Windows:
■Select Run from the Start menu — Windows ‘95 and W indows NT
(version 4 or later).
■Select Run from the File menu — other versions of Windo ws.
4In the Run dialog box, type
drive
:\TRANSCND\QCM\SETUP
(where
drive
is the letter of your CD-ROM drive) and click OK.
The installation program starts and checks your system configuration.
Choose which installation you want and enter a ny information that’s
requested. The installation program reports when installation is
complete.
When the Quick Config Manager installation is comple te, it has its own
program group called Transcend. If other Transcend management
applications are present, the existing Transcend program group now
includes Quick Config Manager.