DUA1640-5AAA02
7-8 CHAPTER 7: MANAGEMENT USING THE WEBINTERFACE
Unit View and
Unit Pages
To display the Unit View and the Unit pages:
1Click on the unit in the stack icon.
The page area changes to show the Unit View and the Unit Status
page. You can make changes to the information on the current page
and click Apply when finished.
2To display another page, click on part of the Unit View or th e links
underneath it, as shown in Figure 7-6.
Figure 7-6 Areas of the Unit View
If you click on:
■The unit (but not on a port or button) — The Unit Status page is
redisplayed.
■A 10BASE-T or transceiver module port — The Port Setup page is
displayed for that port.
■The console port — The Console Port C onfiguration page is
displayed.
■Segment Configuration — The Segment Conf iguration page is
displayed.
■The segment switch or Cascade Switch — The Switch
Configuration page is displayed (only avail able for a PS Hub 50).
If you click on one of the segment butto ns, the Unit View highlights
the ports (with a blue surround) that are part of that segment.
3You can make changes to the information on the page (click Apply
when finished) and choose another when ready. When you have
finished, simply choose another manageme nt category from the side
bar.
For more information on the Unit View, refer to “Unit View” on page
7-10.