DUA1640-5AAA02
3-10 CHAPTER 3: USING THE PS HUB
Figure 3-4 Locating the Brackets for Wall Mounting Two Hubs
3Insert the three screws and fully tighten with a suitable screwdriver.
4Repeat the two previous steps for the other side of the hubs.
To wall mount the hub(s):
1Ensure that the wall you are going to use is smoot h, flat, dry and
sturdy. Ifne cessary, attach a piece of plywood securely to your wall.
Ensure that the plywood is large enough to mount t he hub(s) on.
2Position the hub(s) against the wall (or plywood) ensuring that the
ventilation holes face sideways.
Mark on the wall the position of the screw holes for both wall
brackets. Drill the four holes.
3Using suitable fixings and screws (not provided), a ttach the hub(s)
securely to the wall ( or plywood).