DUA1640-5AAA02
6-6 CHAPTER 6: USING THE COMMANDLINE INTERFACE
Quick Guide to the Commands Tab le 6-2 lists all of the commands available from the CLI and shows
you briefly what each one does and the pages in this chapter that
describes how to use the commands.
Table6-2 Commands
Command What does it do? Description can
be found on...
define Sets IP and SLIP parameters page 6-8
(ip) display Displays IP and SLIP parameters page 6-9
capture Enables/disables RMON Filter capture page 6-12
(system) display Displays administration information for
the hub page 6-9
initialize Configures the stack back to default
settings page 6-11
inventory Lists the units in the stack page 6-10
password Changes the password of the current
user page 6-7
reset Simulates powering off and powering
on the stack page 6-10
unit Accesses another unit in the stack page 6-11