DUA1640-5AAA02
Commands 6-7
Commands The remaining sections in this chapter detail the management functions
that can be carried out from the CLI.
Changing the
Password
We recommend that se tting a password is the fir st task you carry out
on the hub. Setting a password prevents unauthorized m anagement
access to the hub or stack.
If you forget your password while logged out of the hub, refer to
“Solving Problems With the Comma nd Line Interface” on page 8-3.
To set a new password or change an existing password:
1At the top-level menu, enter:
system password
2You are prompted for your old password:
Old password:
If this is the first time you are setting a password, press [Ret urn]
without entering any text. If you already ha ve a password set up, then
enter the password.
3The prompt changes to show:
Enter new password:
Enter your new password. The prompt asks you t o confirm your new
password by entering it again.
The CLI displays a message to tell you that your passwo rd has
successfully changed.