DUA1640-5AAA02
Selecting Your Management Access Method (Windows‘95 and WindowsNT only) B-5
Selecting Your
Management
Access Method
(Windows ‘95 and
Windows NT only)
Windows ‘95 and Windows NT allow you to manage the stack over the
network (in-band) using Quick Config Man ager. To manage the stack
over the network, the stack must have an IP address and IP must be
configured on your management station. Refer to t he Windows ‘95 or
Windows NT documentation for inform ation on configuring IP for your
management station.
To select the communication method you want Quick Config Manage r
to use:
1From the File menu, select Device Access.
Quick Config Manager displays the Devi ce Access dialog box, as shown
in Figure B-1.
Figure B-1 Device Access Dialog Box
2Select the access method.
3Enter the IP Address of the stack, if network access is required.
4Click OK.
Quick Config Manager performs a Reset View. The access method and
IP address are stored and used the next time Quick Config Manager is
run.
Quick Config
Manager Window
Map
Figure B-2 (over the page) shows how all of the Quick Config Manager
windows are accessed. This diagram also appears on the Quick
Reference Guide. The numbers at the top righ t-hand side of the
windows refer to the pages in this chapter that describe the windows.