CSERIAL WEB UTILITY
Introduction If you are using a mana gement station running Microsoft
Windows®‘95 and want to access the web interface through the PS
Hub’s console port, you must use the 3Com serial web utility (SLIP
Driver) supplied on the CD-ROM that accompanies the hub.
Every time you want to access the web interface, use the serial web
utility to set up the connection to the web interface; it launches your
web browser and accesses the web interface using SL IP for you.
If you have any problems accessing the hub ’s web interface using the
serial web utility, refer to “Solving Problems With the Serial Web
Utility” on page C-4.
Installing the
Serial Web Utility The serial web utility can be installed on to a management station that
already has other Transcend management applications installed on it.
The default directory into which the serial web utility is installed is
C:\Program Files\3Com\3Com Serial Web.
This can be changed during the installation if required.
The installation program is a standard Windows ba sed installation.
Toinstall the serial web utility:
1Start Windows ‘95.
If you already have an existing Transcend® management application
running, ensure that it is closed down.
2Insert the CD-ROM into your CD-ROM drive.
3Select Run from the Start menu.