34CHAPTER 4: USING THE CENTRAL CONFIGURATION MANAGER
System Log Settings Tab
19Click on the System Log Settings tab to display the following window:
20If the CCM is operating in IPv6 mode, then the screen will present an IPv6 formatted address field. The NJ240FX will store only one set of System Log server addresses, either an IPv4 set or an IPv6 set. The last type of address that was written to the unit is what will be stored.
NOTE: You are able to see the IPv4 type addresses only when the CCM is operating in IPv4 mode. Similarly, the IPv6 addresses can only be seen when the CCM is operating in IPv6 mode.
21Click Apply to save any changes you make, and a configuration summary dialog box will appear. Verify the information and click OK.
22Click Exit to close the Device Property window.
