Plan RF Coverage 145
To assign channels
1Display the floor plan in the Content panel.
2In the Task List panel, click RF Planning.
3Under RF Planning, click Assign Channels. The Channel Assignment
wizard appears, showing the current channel assignment constraints.
4To change the starting floor for channel assignment, select the floor from
the Begin On Floor List. By default, 3WXM starts at the top floor and
works down.
5To change the ending floor for channel assignment, select the floor from
the End On Floor List.
The ending floor number must be lower than or equal to the starting
floor number.
6To change the radio type for which to assign channels, select the radio
type from the Technology list. By default, 3WXM assigns channels for all
radio types on the MAPs placed in the building.
7To prevent 3WXM from taking the channel assignments for the floor
above into account when calculating the channel assignments for a floor,
clear Use Cross-Floor Channel Information.
8Click Next. The Channel Assignment Progress page appears.