Manuals / 3Com / Computer Equipment / Switch

3Com WX4400 3CRWX440095A manual Equipment, Configure WX Switch Connection Information

Models: WX1200 3CRWX120695A WX4400 3CRWX440095A WXR100 3CRWXR10095A

1 198
Download 198 pages 38.27 Kb
Page 40
Image 40

40CHAPTER 2: PLANNING AND MANAGING YOUR WIRELESS NETWORK WITH 3WXM

Configure WX Switch Connection Information

You need to supply connection information for the WX switch on both the WX switch and in 3WXM when you make the WX a managed device. Connection information includes the IP address of the switch and how it will connect to the backbone; for example, by means of a VLAN or a port.

Configure Boot Information

You select the software image that the WX will use when reset, or optionally, the configuration file the WX will use when reset.

Equipment

To physically install a WX switch:

Installation

 

1Unpack and rack the WX switch in the wiring closet or data center location.

2Plug the WX switch electrical cord into a power outlet.

3Connect a network access cable from your existing network to one of the Ethernet ports on the switch (10/100 or Gigabit Ethernet, depending on the WX model and available interfaces on the network).

Remember the port number you used. You will need to know this when performing the initial setup of the switch.

4Connect a serial interface to the console port of the WX switch to access the console’s CLI for initial setup.

To physically install MAPs:

1Instruct the cabling installer to run the Cat. 5 Ethernet cable from the closest wiring closet to intended location of the MAP.

2Unpack the MAP, and select the appropriate mounting kit for your installation location.

3Install the MAP at the indicated location on the floor.

4Connect the Cat 5. Ethernet cable(s) to the MAP.

5At the wiring closet, connect the MAP to the infrastructure equipment:

a If you are directly connecting the MAP to a WX switch, plug the other cable end(s) to the indicated port(s).

b If you are indirectly connecting the WX to the switch, plug the other cable end(s) to an available network port on the wiring closet switch. If the switch does not supply PoE, then ensure that a mid-span PoE device is inserted in-line with the connection.

Page 39 Page 41
Page 40
Image 40
3Com WX4400 3CRWX440095A manual Equipment, Configure WX Switch Connection Information, Configure Boot Information
Page 39 Page 41

WX1200 3CRWX120695A, WX4400 3CRWX440095A, WXR100 3CRWXR10095A specifications

The 3Com WX2200 (3CRWX220095A), WX4400 (3CRWX440095A), WX1200 (3CRWX120695A), and WXR100 (3CRWXR10095A) are part of a robust suite of wireless networking solutions offered by 3Com, designed to meet the needs of modern enterprise environments. These devices provide reliable connectivity, flexibility, and scalability, making them ideal for businesses of all sizes.

The 3Com WX2200 is a high-performance wireless switch that supports up to 64 access points, making it suitable for medium to large deployments. It boasts advanced features such as dynamic RF management, which optimizes channel selection and power levels based on real-time network conditions. This ensures maximum coverage and minimizes interference, leading to improved user experiences. Additionally, it supports dual-band operation and can seamlessly integrate with various wireless access points, providing enhanced throughput and robust performance.

The WX4400 is designed for high-density environments and offers extensive scalability. It supports up to 128 access points and is equipped with advanced security features, including WPA2 enterprise encryption and role-based access control. This switch also features intelligent load balancing, allowing it to dynamically distribute user traffic across available access points, thus enhancing overall network efficiency.

The WX1200, positioned as an entry-level solution, is well-suited for small to medium-sized businesses. It offers a user-friendly management interface, allowing IT staff to quickly configure and monitor the network. This device supports a variety of deployment scenarios and can be easily integrated into existing infrastructure. It also comes equipped with essential security features to protect the network from unauthorized access.

The WXR100 complements the series by providing simplified management for access points, ensuring that businesses can easily deploy and maintain their wireless networks. It supports various management protocols and integrates with a variety of third-party systems, enhancing inter-operability. With Power over Ethernet (PoE) support, the WXR100 can deliver power to connected access points, reducing the complexity and costs associated with additional power infrastructure.

Together, these solutions embody 3Com's commitment to delivering high-quality networking products that enhance connectivity and performance. With features such as scalability, advanced security, dynamic load balancing, and centralized management, the WX2200, WX4400, WX1200, and WXR100 form a comprehensive wireless networking ecosystem tailored for today’s enterprise challenges.