Monitoring Examples 175
13To disable active scanning for rogue devices, deselect Enable Active Scan.
When active scan is enabled, radios send probe any requests (probe requests with a null SSID name), to solicit probe responses from other access points. Radios also passively scan by listening for beacons and probe responses. When active scan is disabled, radios perform passive scanning only.
14Click Finish to save the changes and close the wizard.
To verify that countermeasures are being taken against the rogue
1Click on the Rogue Detection option in the main 3WXM tool bar.
2Select a rogue from the Filtered List and click the Activity Log tab.
3The Status column will show countermeasure activity.
If countermeasures start, stop, and start again, the rogue may have left the area, then returned, or another MAP in the coverage area may have taken over countermeasure activities from the last MAP to detect the rogue.
