Configure Guest Access Services 67
Configure Guest Access Services
Guest access is access for visitors at your location and is typically clear (no
encryption).
This section contains the following information about how to configure
Guest access services:
“Task Table” on page67
“Step Summary” on page 69
“Optional: Configure Mobility Profiles” on page79
Table11 contains the tasks you must perform to configure Guest access
services. The “Step Summary” provides the configurable options you
should set. The table contains references to the section “Example:
Configure Employee Access” on page 53. The references are provided in
case you want to refer back to detailed steps. However, be sure to use
the configurable options for Guest access services set forth in the “Step
Summary” on page 69. Also, you can optionally configure mobility
profiles for your Guest access services to limit access based on criteria,
such as RF coverage area or time of day.
Task Tab le Table 11 contains the tasks you need to perform to create Guest access services.
For a summary of configurable items, see “Step Summary” on page 69.
Table11 Creating a Service for Guest Access
Task Path
Primary Parameters to
Configure
“Create a
Radio Profile”
on page 54
1Tool bar option: select
Configuration.
2Organizer panel: expand
the WX switch.
3Expand Wireless.
4Click Radio Profiles.
5Select Radio Profile in the
Task List.
From the Create Radio Profile
wizard:
Radio profile name: enter a name
After you create the service
profile, you can map it to the
radio profile.
After you install the MAPs, you
can map their radios to the radio
profile.
Note: The examples in this chapter
configure the radio profile first.
However, you also can configure
the radio profile later as part of
service profile configuration.