3Com WX4400 3CRWX440095A, WXR100 3CRWXR10095A manual Creating a Service for VoWIP Access

82CHAPTER 3: CONFIGURING WIRELESS SERVICES

Table 12 Creating a Service for VoWIP Access

Task	Path		Primary Parameters to Configure
“Create a Radio Profile”	1	Tool bar option: select	From the Create Radio Profile wizard:
on page 54		Configuration.	„ Radio profile name: enter a name
	2	Organizer panel: expand the
			For SpectraLink, from the Radio Profile Properties
		WX switch.
			dialog:
	3	Expand Wireless.
			„ 802.11 attributes: change DTIM to 3
	4	Click Radio Profiles.
			After you create the service profile, you can map it
	5
		Select Radio Profile in the Task	to the radio profile.
		List.	After you install the MAPs, you can map their radios
			to the radio profile.
			Note: The examples in this chapter configure the
			radio profile first. However, you also can configure
			the radio profile later as part of service profile
			configuration.
“Create a Service Profile	1	Tool bar option: select	From the Create Service Profile wizard:
for Voice” on page 84		Configuration.	„ Service profile name: edit name
	2	Organizer panel: expand the
			„ SSID name: enter name
		WX switch.
			„ SSID Type: use Clear (unencrypted)
	3	Expand Wireless.
			„ VLAN Name: enter name
	4	Click Wireless Services.
			„ Authentication server: select LOCAL
	5	Select Voice Service Profile in
			„ Radio profile: select one
		the Task List.
“Set Up a VLAN for	1	Tool bar option: select	From the Create VLAN wizard:
VoWIP on WX Switches”		Configuration.
on page 92	2	Organizer panel: expand the	„ VLAN Name: enter name
		WX switch.	„ VLAN ID: select number
	3	Expand System.	„ IP Address: enter IP Address
	4	Click VLANs.	„ Ports: select them and move them to the voice
	5	Select VLAN in the Task List.	VLAN

For SpectraLink, from the VLAN Properties dialog: „ IGMP: disable

SVP requires IGMP snooping to be disabled.