3Com WX1200 3CRWX120695A, WXR100 3CRWXR10095A Configure, Employee Access, Services, Task Table

50CHAPTER 3: CONFIGURING WIRELESS SERVICES

Configure	Services for Employee access are typically configured to provide secure,
Employee Access	encrypted access to the wireless network.
Services	The following sections provide information about how to configure
	Employee access:
	„ “Task Table” on page 50
	„ “Step Summary” on page 52
	„ “Example: Configure Employee Access” on page 53
	Table 9 on page 50 contains the tasks you need to perform to configure
	Employee access services. The summary provides the configurable options
	you should set. The section “Example: Configure Employee Access” on
	page 53 guides you through the primary wizards and pages in 3WXM to
	configure Employee access services.
Task Table	Table 9 contains the tasks you need to perform to create a service for
	employee access. For a summary of configurable items, see “Step
	Summary” on page 52. For detailed steps about how to perform each of
	these tasks, see “Example: Configure Employee Access” on page 53.
	Table 9 Creating a Service for Employee Access

			Primary Parameters to
Task	Path		Configure
“Create a	1	Tool bar option: select	From the Create Radio Profile
Radio Profile”		Configuration.	wizard:
on page 54	2	Organizer panel: expand	„ Radio profile name: enter a
		the WX switch.	name
	3	Expand Wireless.	After you create the service profile,
	4	Click on Radio Profiles.	you can map it to the radio profile.
			After you install the MAPs, you can
	5	Select Radio Profile in the
			map their radios to the radio
		task list.
			profile.

Note: The examples in this chapter configure the radio profile first. However, you also can configure the radio profile later as part of service profile configuration.