Generate a Work Order 149
If the coverage area provided by a MAP on the floor above or below is
one meter or less, 3WXM displays a message. This coverage area is not
displayed on the floor plan.
Generate a Work Order
You can generate a work order as part of your wireless network
planning. The work order provides all of the necessary information for the
physical installation of the 3Com Mobility System. A work order shows
where the MAPs should be installed, WX initial setup configuration
information, and projected RSSI information that is useful when verifying
the installation.
To generate a work order
1Display the floor plan in the Content panel.
2In the Task List panel, click RF Planning.
3Under RF Planning, click Work Order Report. The Work Order
Generation dialog is displayed.