System Utilities

3.Retype your password and press Enter to verify your first entry.

After you set a password, the computer sets the Supervisor Password (or User Password) parameter to Present. The next time you boot up, resume from suspend mode, run the BIOS setup utility, or unlock system resources, the password prompt appears and you must type the supervisor or user password to continue.

Important! The system continues to ask for your password until you enter the correct password. If you forget your password, contact your dealer for assistance.

To remove a password, select the password you want to remove and press ← or →.

Diskette Drive Access Control (DOS mode only)

This parameter allows you to control the read and write functions of the floppy drive. The available options. are: Normal, Write Protect All Sectors, Write Protect Boot Sector, and Disabled. The default is Normal.

99

Page 107
Image 107
Acer TravelMate 7300 manual Diskette Drive Access Control DOS mode only