
System Utilities
With this parameter set to Normal, the floppy drive functions normally. When the parameter is set to Write Protect All Sectors, all write functions to the floppy drive are disabled, but you can still read from a disk in the floppy drive. When the parameter is set to Write Protect Boot Sector, all write functions to the boot sector of the disk in the floppy drive are disabled. When the parameter is set to Disabled, the floppy drive is disabled.
Hard Disk Drive Access Control (DOS mode only)
This parameter allows you to control the read and write functions of the hard drive. The available options. are: Normal, Write Protect All Sectors, Write Protect Boot Sector and Disabled. The default is Normal.
With this parameter set to Normal, the hard drive functions normally. When the parameter is set to Write Protect All Sectors, all write functions to the hard drive are disabled. When the parameter is set to Write Protect Boot Sector, all write functions to the boot sector of the hard drive are disabled. When the parameter is set to Disabled, the hard drive is disabled.
Start Up Sequences
This parameter determines which drive the system boots from when you turn on the system. The following table describes the available settings.
100