Manuals / Actiontec electronic / Computer Equipment / Network Router

Actiontec electronic MI408 manual To define a shaping class, Name the new class and click Apply

Models: MI408

1 140

Download 140 pages 29.11 Kb

Page 124

Actiontec Broadband Router User Manual

To define a shaping class:

1.Click Add in the “Tx Traffic Shaping” section of the Edit Device Traffic Shaping screen. The “Add Shaping Class” screen appears.

2.Name the new class and click Apply.

3.Click the class name to edit the shaping class. The “Edit Class” screen appears.

Configure the following parameters:

Name Enter the name of the class in this text box.

Class Priority The class can be granted one of eight priority levels, zero being the highest and seven the lowest (opposite the rules priority levels). This level sets the priority of a class in comparison to other classes on the device.

Tx Bandwidth Tx bandwidth is the reserved transmission bandwidth in kilobits per second. The maximum allowed bandwidth can be limited by selecting Specify from the drop-down list. The screen will refresh, adding another “Kbits/s” text box. Enter the desired maximum allowed bandwidth.

Rx Bandwidth In the same manner, Rx bandwidth is the reserved reception bandwidth, which can also be limited to a maximum allowed bandwidth.

122

Image 124

Actiontec electronic MI408 manual To define a shaping class, Name the new class and click Apply

Contents

Table of Contents Troubleshooting 111 Quality of Service 115 Specifications 131Limited Warranty 135 Monitoring the Router 107Package Contents Introduction1Features Minimum System RequirementsGetting to Know the Router Power Light Broadband LightInternet Light Ethernet Lights 1Ethernet Ports Reset ButtonBroadband Port Power switch powers the Router on and off Power SwitchPower Port Connecting Router Setting Up the RouterComputer Network Configuration Windows XPWindows 98/Me WindowsWindows NT Linux Configuring the RouterThen press Enter on the keyboard Connecting the Router Home My Router Broadband ConnectionQuick Links Action ZoneThis page left intentionally blank Configuring My Network Settings Accessing My NetworkUsing My Network Configuring My Network Settings Page Click Add. The Add Port Forwarding Rule screen appears Page Rename This Device This page left intentionally blank Using Network Connections Network Home/Office General Internet Protocol BridgeDNS Server IP Address DistributionRouting Routing Table Ethernet ConnectionAdditional IP Addresses General Ports Ethernet Switch Broadband Ethernet Connection Configuring the Broadband Ethernet Connection Internet Protocol IP Address Distribution Routing Internet Connection Firewall WAN PPPoE/WAN PPPoE General PPP Configuration PPP AuthenticationPPP session automatically ends PPP reconnect attempts, as provided by the ISPPPP Compression Internet Protocol Routing Table This page left intentionally blank Configuring Router’s Security Page General Configured in the Access Security Level Incoming traffic Network outgoing trafficLimited Only commonly Network from InternetAccess Control Click Apply to save changesPage Configuring the Router’s Security Port Forwarding DMZ Demilitarized Zone Host Click Apply to save the changesPort Triggering Configuring the Router’s Security Remote Administration Configuring the Router’s Security Static NAT Advanced Filtering Page Configuring the Router’s Security Security Log Configuring the Router’s Security Page Configuring the Router’s Security Page Configuring the Router’s Security Page Using Parental Controls Activating Parental ControlsPage Advanced Parental Controls Parental ControlsPage Using Advanced Settings Page Firmware Upgrade Upgrading From the Internet Automatically Check and UpgradeAutomatically Check and Send E-mail Automatic Check Disabled Firmware RestoreManual Checking and Upgrading Configuration File System Settings Warn User Before Network Configuration Changes Configure a number of concurrent users…Broadband Router’s Hostname Local DomainEnable Logging Low Capacity Notification EnabledAllowed Capacity Before Email Notification System Log Buffer SizeClick in this check box to activate security logging Security Log Buffer SizeEnter the size of the security log buffer in this text box ServerServer Requires Authentication PPP TimeoutDhcp Timeout PortDate and Time Scheduler Rules Page Routing Page IP Address Distribution Domain RoutingPage Using Advanced Settings Page Diagnostics Restoring Default Settings Reboot the RouterARP Address Resolution Protocol Table MAC CloningUsers Local Administration QoSDynamic DNS Connection To Update PasswordOffline User NameBackup MX DNS ServerHost Name Wildcard101 Network Objects Universal Plug and Play UPnP 104 Protocols 105106 Monitoring Router Router StatusAdvanced Status Monitoring the Router Traffic Monitoring Accessing the Router if Locked Out TroubleshootingRestoring the Router’s Default Settings Time out error occurs when entering a URL or IP Address LAN Connection FailureEnsure the Subnet Mask address is set to Which connection speeds does the Router support?How do I find out what IP address my computer is using? No. Follow these steps to refresh the IP addressWhat is the default user name for the Router? How many computers can be connected through the Router?Traffic Priority Quality of Service802.1p Priority MSN Messenger/Windows Messenger 323 Port triggering applicationsAppendix a Quality of Service 118 Traffic Shaping 120 121 To define a shaping class Name the new class and click Apply123 124 125 126 127 802.1p Settings 129 130 LED Indicators Specifications BPower, LAN 8, WAN, Internet Environmental Modifications Regulatory Compliance NoticesClass B Equipment 134 Limited Warranty 135136 Limited Warranty 138