Actiontec electronic MI408 manual 127

Appendix A Quality of Service

1.Click Quality of Service at the top of the Home screen, then click DSCP Settings. The “DSCP Settings” screen appears.

2.To edit an existing entry, click the appropriate icon in the “Action” column. To add a new entry, click Add. In either case, the “Edit DSCP Settings” screen appears.

3.Configure the following parameters:

DSCP Value (hex) - Enter the DSCP value as a hexadecimal value.

802.1p Priority - Select a 802.1p priority level from the drop-down list, zero being the lowest and seven the highest (each priority level is mapped to low/ medium/high priority). The default DSCP value for packets with an unassigned value is zero.

4.Click Apply to save the settings.

127