QoS, Local Administration | Actiontec electronic MI408 guide

Chapter 7 Using Advanced Settings

•E-mail Notification - E-mail notification can be used to receive indications of system events for a predefined severity classification. The available types of events are “System” or “Security” events. The available severity of events are Error, Warning, and Information.

To configure E-mail notification for a specific user:

1.Make sure an outgoing mail server has been configured in “System Settings”. If not, click Configure Notification Mail Server to configure the outgoing mail server.

2.Enter the user’s E-mail address in the “Notification Address” text box.

3.Select the “System” and “Security” notification levels in the “System Notify Level” and “Security Notify Level” drop-down lists.

☞Note: Changing any of the user parameters will prompt the con- nection associated with the user to terminate. For changes to take effect, activate the connection manually after modifying user parameters.

QoS

The Router’s QoS (Quality of Service) capabilities are covered in detail in Appendix A of this manual.

Local Administration

Clicking Administration in the Advanced screen generates the “Administration” screen. This screen allows the user to allow local Telnet access using a particular Telnet port.

To use, select a Telnet port by clicking in the appropriate check box, then click Apply.

97

Image 99

Actiontec electronic MI408 manual QoS, Local Administration

Contents

Table of Contents Monitoring the Router 107 Troubleshooting 111 Quality of Service 115Specifications 131 Limited Warranty 135 Introduction1 Package Contents Minimum System Requirements Features Getting to Know the Router Ethernet Lights 1 Power LightBroadband Light Internet Light Reset Button Ethernet PortsBroadband Port Power Switch Power switch powers the Router on and offPower Port Setting Up the Router Connecting Router Windows XP Computer Network Configuration Windows Windows 98/MeWindows NT Configuring the Router LinuxThen press Enter on the keyboard Connecting the Router Home Action Zone My RouterBroadband Connection Quick Links This page left intentionally blank Accessing My Network Configuring My Network Settings Using My Network Configuring My Network Settings Page Click Add. The Add Port Forwarding Rule screen appears Page Rename This Device This page left intentionally blank Using Network Connections Network Home/Office General Bridge Internet Protocol IP Address Distribution DNS Server Routing Ethernet Connection Routing TableAdditional IP Addresses General Ports Ethernet Switch Broadband Ethernet Connection Configuring the Broadband Ethernet Connection Internet Protocol IP Address Distribution Routing Internet Connection Firewall WAN PPPoE/WAN PPPoE General PPP reconnect attempts, as provided by the ISP PPP ConfigurationPPP Authentication PPP session automatically ends PPP Compression Internet Protocol Routing Table This page left intentionally blank Configuring Router’s Security Page General Network from Internet Configured in the AccessSecurity Level Incoming traffic Network outgoing traffic Limited Only commonly Click Apply to save changes Access ControlPage Configuring the Router’s Security Port Forwarding Click Apply to save the changes DMZ Demilitarized Zone Host Port Triggering Configuring the Router’s Security Remote Administration Configuring the Router’s Security Static NAT Advanced Filtering Page Configuring the Router’s Security Security Log Configuring the Router’s Security Page Configuring the Router’s Security Page Configuring the Router’s Security Page Activating Parental Controls Using Parental ControlsPage Parental Controls Advanced Parental ControlsPage Using Advanced Settings Page Firmware Upgrade Automatically Check and Upgrade Upgrading From the InternetAutomatically Check and Send E-mail Firmware Restore Automatic Check DisabledManual Checking and Upgrading Configuration File System Settings Local Domain Warn User Before Network Configuration ChangesConfigure a number of concurrent users… Broadband Router’s Hostname System Log Buffer Size Enable LoggingLow Capacity Notification Enabled Allowed Capacity Before Email Notification Server Click in this check box to activate security loggingSecurity Log Buffer Size Enter the size of the security log buffer in this text box Port Server Requires AuthenticationPPP Timeout Dhcp Timeout Date and Time Scheduler Rules Page Routing Page Domain Routing IP Address DistributionPage Using Advanced Settings Page Diagnostics Reboot the Router Restoring Default Settings MAC Cloning ARP Address Resolution Protocol Table Users QoS Local Administration Dynamic DNS User Name Connection To UpdatePassword Offline Wildcard Backup MXDNS Server Host Name 101 Network Objects Universal Plug and Play UPnP 104 105 Protocols 106 Router Status Monitoring Router Advanced Status Monitoring the Router Traffic Monitoring Troubleshooting Accessing the Router if Locked OutRestoring the Router’s Default Settings Which connection speeds does the Router support? Time out error occurs when entering a URL or IP AddressLAN Connection Failure Ensure the Subnet Mask address is set to No. Follow these steps to refresh the IP address How do I find out what IP address my computer is using? How many computers can be connected through the Router? What is the default user name for the Router? Quality of Service Traffic Priority802.1p Priority 323 Port triggering applications MSN Messenger/Windows Messenger Appendix a Quality of Service 118 Traffic Shaping 120 121 Name the new class and click Apply To define a shaping class 123 124 125 126 127 802.1p Settings 129 130 Specifications B LED IndicatorsPower, LAN 8, WAN, Internet Environmental Regulatory Compliance Notices ModificationsClass B Equipment 134 135 Limited Warranty 136 Limited Warranty 138