Actiontec electronic MI408 manual 124

Actiontec Broadband Router User Manual

To add a new outbound/inbound class rule, click Add in the Edit Class screen. The “Add Traffic Priority Rule” screen appears.

Source Address - The source address of the packets sent to or received from the network object (computer A in the above example). To add an address:

1.Select Specify Address from the drop-down list. The screen will refresh and an “Add” link appears.

2.Click Add, and add a new network object. Note that clicking Add is equiv- alent to clicking “New Entry” in the “Network Objects” screen.

Destination Address - The destination address of the packets sent to or received from the network object. This address can be configured in the same manner as the source address.

Protocol - Select a specific traffic protocol from the drop-down list, or add a new one. To add a new traffic protocol:

1.Select Specify Protocol from the drop-down list. The screen will refresh and an “Add” link appears.

2.Click Add, and add a new protocol. This is the same as clicking “New Entry” in the “Protocols” screen.

DSCP -Use this drop-down list to mark a DSCP value on packets matching a connection that matches this rule. To do so, select Specify from the drop-down list and enter the hexadecimal value of the DSCP.

124