PHASE RESEARCH

USER GUIDE

2-4 Remote Displays

The Remote Displays are 5-by-9 inch modules with three illuminated digits visible on both sides. The Displays show minutes and seconds to document the time each car spends during key steps in the ordering and sales process. (When no cars are in the drive-thru, the Displays show the average vehicle times during the shift or other appropriate time period.)

SIGNAL

INPUT/OUTPUT

CONNECTORS

BEEP VOLUME

One to Five Remote Displays May be Programmed to:

#￿ Show the elapsed time for a selected event in progress. See “Set Remote Display Options” on page 13-20.

#￿ Show the average event time for a selected time period (indicated by flashing mode). See “Set Remote Display Options” on page 13-20.

#￿ Show the same information on more than one Display (example: one Remote for your cashier and customers, and another for your cooks). See “Set Remote Display Options” on page 13-20.

#￿ Communicate information through audible beeps (example: a car arrives at a station). The

beep volume can be adjusted up or down as desired. See “Set Targets” on page 13-14.

The Sixth Remote Display is a Two-Color Special Percentage Remote that may be Programmed to:

#￿ Show the percentage of cars that satisfy the A-grade target time on any selected event. See “Set Remote Display Options” on page 13-20.

SECTION 2 - OPERATION

2-5