PHASE RESEARCH
USER GUIDE
4.Press 
or 
to select the report option. The Timer displays an X for each selection.
5.Press 
to move the cursor to REPORT.
6.Press 
to move the cursor to [@] immediately to the right of REPORT.
7.Press 
or 
to select one of two options: a specified time (time=) or a specified time increment after store closing (close+).
8.Press 
to move the cursor to either [=] or [+] depending on your choice in the previous step.
9.Press 
or 
to set the time for printing the automatic reports.
NOTE: You can turn the following features – HEADER, TARGET, PEC, AUTO – ON or OFF.
10.Press 
to move cursor immediately to the right of PULLOUT.
11.Press 
or 
to select ON or OFF.
12.Press 
to move cursor to the right of FTe (Fulltime Event).
13.Press 
or 
to select ON (to print any events in the Timer) or OFF.
14.Press 
to move cursor to the right of HEADER.
15.Press 
or 
to select ON (to print a Report Header on each report) or OFF.
16.Press 
to move cursor to the right of PEC (Print Each Car).
SECTION 13 - PARAMETERS PROGRAMMING |