PHASE RESEARCH
USER GUIDE
18.Press 
to move the cursor to the field that begins F REPEAT.
19.Press 
to move the cursor to the field just to the right of @.
20.Press 
or 
to set the number of times you want the beep to repeat. The Remote Display will sound two successive short beeps at intervals of 2, 5, 10, 15, or 30 seconds depending on your choice. (Select OFF to disable the repeat beep.)
21.Press 
to move the cursor immediately to the left of DAYS.
22.Press 
to move the cursor to [A] (A means “All”), or to any of the days to the right.
23.Press 
or 
to select the days to which you wish to copy the targets you have set. Your selections are now highlighted.
24.Press 
to move the cursor to the DAYPARTS field.
25.Press 
to move the cursor to [A] (A means “All”), or to any of the day- parts to the right.
26.Press 
or 
to select the dayparts to which you wish to copy the targets you have set. Your selections are now highlighted.
27.Press 
to perform the specified copy operation. Repeat this procedure as needed for different targeted events.
28.Press 
to move the cursor to the top of the screen to the [TARGET], [DAY] and [DAYPART] fields.
29.Press 
or 
to scroll through the TARGET, DAY, and DAYPART values to confirm your settings.
SECTION 13 - PARAMETERS PROGRAMMING |