PHASE RESEARCH
USER GUIDE
7.Press 
to change the time in
NOTE: The ending time of each daypart coincides with the starting time of the next daypart for the same day, though you may use different dayparts for each day of the week. Daypart 1 always starts at the opening time for the day, and the last programmed daypart always ends at the closing time for the day.
8.Press 
to add a new daypart by moving the cursor immediately to the right of the first unused daypart number (for which START and STOP times have not yet been entered).
9.Press 
or 
to add the daypart. The START and STOP times are now entered.
10.Press 
to delete dayparts by moving the cursor to the [=] field of the first daypart (moving from top to bottom, or 1 to 8) you want to remove.
11.Press 
to delete the daypart. Any dayparts that follow will automatically be removed as well. And the store’s closing time will automatically be entered in place of the STOP time for the last remaining daypart.
NOTE: If all days use the same dayparts, you can set the dayparts for only one day and then use the COPY TO feature to copy the same settings to all other days, as explained in the following steps.
12.Press 
to move the cursor immediately to the right of DAY:.
13.Press 
or 
to select the desired day from which to copy.
14.Press 
to move cursor to COPY.
15.Press 
to move the cursor to <ENTER>.
16.Press 
to copy the displayed daypart settings to all other days, replacing any individual dayparts previously set for these days.
SECTION 13 - PARAMETERS PROGRAMMING |