PHASE RESEARCH
USER GUIDE
The Set Dayparts screen lets you break each day into a number of smaller units called day- parts, which are used to group data for viewing and reporting.
From STORE PARAMETERS Screen (see “PARAMETERS PROGRAMMING” on page
1.Press to select [DAYPARTS].
2.Press . You are now in the Set Dayparts screen.
1 1 : 0 0 A M | M O N F E B | 2 3 | |||||
| S E T D A Y P A R T S |
| |||||
D A Y : | S U | N |
|
|
|
|
|
S | T A R | T | S | T | O | P |
|
1 = 6 : 0 0 A M - 1 0 : 3 0 A M |
| ||||||
2 = 1 0 : 3 0 A M - | 1 : 0 0 P M |
| |||||
3 = 1 : 0 0 P M - | 4 : 3 0 P M |
| |||||
4 = 4 : 3 0 P M - | 8 : 0 0 P M |
|
5 = 8 : 0 0 P M - 1 2 : 0 0 A M 6 7 8
C O P Y T O A L L < E N T E R >
NOTE: The cursor is now on DAY. To change the day of the week, complete the following two steps.
3.Press to move the cursor immediately to the right of DAY:.
4.Press or to change the day.
5.Press to move to the desired daypart.
6.Press to move to the [=] or
SECTION 13 - PARAMETERS PROGRAMMING |