PHASE RESEARCH
USER GUIDE
NOTE: Selecting either [VIEW] or [PRINT] will allow you to view three Diagnostic screens (all showing details about the FT EVENTS and PULLOUTS, as shown on screens below):
Choosing [PRINT] will produce these three Diagnostic screens on a single report tape.
Selecting [VIEW] will allow you to view the same three Diagnostic tools on the display screen by using the following steps:
6.Press 
after selecting [VIEW]. The number of FT EVENTS and PULLOUTS for the date selected will appear on the main Diagnostic screen. (If you have selected [PRINT], the three Diagnostic screens will be printed as described above.) If you have selected [VIEW], proceed to step 7.
7.Press 
to move cursor to FT EVENTS or PULLOUTS.
8.Press 
to display another Diagnostic screen with more details about either selection, FT EVENTS or PULLOUTS.
NOTE: If you wish to view the other operating exception (FT EVENTS or PULLOUTS), return to the main Diagnostic screen and repeat steps 7 and 8.
If you wish to view information for other days, return to the main
Diagnostic screen to select the desired date.
1 1 : 0 0 | A M | M O N | F E B | 2 3 |
D | I A | G N O S T I C |
| |
D A T E : F E B / 2 3 / 0 1 |
|
| ||
F | T E V E N T S |
|
| |
P O W E R | O N |
| = | 3 1 |
P O W E R | O F F | = | 3 1 | |
A C C E S S | D E N I E D | = | 9 | |
A C C E S S | G R A N T E D = 2 6 7 | |||
M A I N C O N F I G | = | 5 | ||
A L T C O N F I G | = | 5 | ||
R E S E T | M E M O R Y | = | 1 | |
1 1 : 0 0 | A M |
|
| M O N | F E B | 2 3 | |
| D I | A G | N O S T I | C |
| ||
D A T E : F E B / 2 3 / 0 1 |
|
| |||||
| P | U L | L O U T S |
|
| ||
E V E N T | : | 0 | 0 |
| = |
| 3 |
R E M O V E | C A R | = |
| 2 | |||
R E S E T | L O O P | = |
| 1 | |||
M A X C A R | S |
|
| = |
| 1 | |
D R I V E | O | F F |
| = |
| 4 | |
< M A I N M E N U > T O E X I T | < M A I N M E N U > T O E X I T | |
|
|
|
SECTION 14 - DIAGNOSTICS SCREENS |